Loading...
> >

Carrara Rain Storm - Free to Carrara Users - beta released (updated)

2

Comments

  • HeadwaxHeadwax Posts: 9,987

    Thanks, it's surprisingly easy to use, even for me :) 

  • DiomedeDiomede Posts: 15,169

    Thank you, Andrew!

    The new StormCreek file opened without error.  yesyes 

    Looking forward to playing with it.

  • Bunyip02Bunyip02 Posts: 8,605
    edited December 2018
    Headwax_Carrara said:

    Thanks, it's surprisingly easy to use, even for me :) 

    Had a few problems when I first started, then I read the directions.

    Autumn Rain 1.png
    800 x 1040 - 2M
    Post edited by Bunyip02 on
  • HeadwaxHeadwax Posts: 9,987
    edited December 2018
    Diomede_Carrara said:

    Thank you, Andrew!

    The new StormCreek file opened without error.  yesyes 

    Looking forward to playing with it.

    Pleasure Ted, looking forward to seeing what you make!!

    Bunyip02, thats absolutely spiffing :)  Looks like a sunshower!

    Here's something I did with Philemenos cutouts making a few snowflakes then substituting the rain drops with snow.

    The cutouts are attached. If you subsittute them for the rain  - you'll need to untick align with normals in the surface replicator and srop the size of the snowflakes down to 3percent (?) (instade of 100 percent) in the Motion tab

    Image may contain: tree and outdoor

     

    txt
    txt
    snowcutoutsPost.txt
    498K
    Post edited by Headwax on
  • StezzaStezza Posts: 8,055

    sweet..

     

    had a funny one not long ago... used Harpsburg on a rainy day and Carrara hung with one tile left to render about 1/3rd through.... weird surprise

  • HeadwaxHeadwax Posts: 9,987
    Stezza_Carrara9 said:

    sweet..

     

    had a funny one not long ago... used Harpsburg on a rainy day and Carrara hung with one tile left to render about 1/3rd through.... weird surprise

    hmm, maybe water on the mother board :)?

    hope that's a one off!

     

     

  • WendyLuvsCatzWendyLuvsCatz Posts: 38,206
    Headwax_Carrara said:
    Stezza_Carrara9 said:

    sweet..

     

    had a funny one not long ago... used Harpsburg on a rainy day and Carrara hung with one tile left to render about 1/3rd through.... weird surprise

    hmm, maybe water on the mother board :)?

    hope that's a one off!

     

     

    you can still save it though and postwork out the tile 

    just for future reference yes

  • ed3Ded3D Posts: 2,184

    __and can this Be in Carrea 7 Pro ??

  • StezzaStezza Posts: 8,055
    Wendy_Carrara said:
    Headwax_Carrara said:
    Stezza_Carrara9 said:

    sweet..

     

    had a funny one not long ago... used Harpsburg on a rainy day and Carrara hung with one tile left to render about 1/3rd through.... weird surprise

    hmm, maybe water on the mother board :)?

    hope that's a one off!

     

     

    you can still save it though and postwork out the tile 

    just for future reference yes

    Nope.. it hung Carrara.. had to Ctrl-Alt-Del it.. crying

  • HeadwaxHeadwax Posts: 9,987
    ed3D said:

    __and can this Be in Carrea 7 Pro ??

    should be okay, all the shaders are procedural so no mip mapping that I am aware of - let me know how you go

     

  • UnifiedBrainUnifiedBrain Posts: 3,588
    Bunyip02_Carrara said:
    Headwax_Carrara said:

    Thanks, it's surprisingly easy to use, even for me :) 

    Had a few problems when I first started, then I read the directions.

    Awesome, Bunyip!  What were some of your other settings, if I may ask?  Looks painted.

     

     

     

    Headwax_Carrara said:
     

    Here's something I did with Philemenos cutouts making a few snowflakes then substituting the rain drops with snow.

    The cutouts are attached. If you subsittute them for the rain  - you'll need to untick align with normals in the surface replicator and srop the size of the snowflakes down to 3percent (?) (instade of 100 percent) in the Motion tab

    Image may contain: tree and outdoor

    I haven't tried it yet, but HW, you have obviously gone above and beyond the call.  Such a cool product!

     

  • Bunyip02Bunyip02 Posts: 8,605
    edited December 2018
    UnifiedBrain said:
    Bunyip02_Carrara said:
    Headwax_Carrara said:

    Thanks, it's surprisingly easy to use, even for me :) 

    Had a few problems when I first started, then I read the directions.

    Awesome, Bunyip!  What were some of your other settings, if I may ask?  Looks painted.

     

     

     

    Headwax_Carrara said:
     

    Here's something I did with Philemenos cutouts making a few snowflakes then substituting the rain drops with snow.

    The cutouts are attached. If you subsittute them for the rain  - you'll need to untick align with normals in the surface replicator and srop the size of the snowflakes down to 3percent (?) (instade of 100 percent) in the Motion tab

    Image may contain: tree and outdoor

    I haven't tried it yet, but HW, you have obviously gone above and beyond the call.  Such a cool product!

     

    It's the stock scene from Howie Farkes excellent Country Lane 2 - Autumnia - https://www.daz3d.com/country-lane-2-autumnia

    Primivol cloud added to background.

    With Headwax's Rain1 - Storm Beta, Lights and Dummy Lights were removed, light with http set at about 40%

    Then in Post-work, Brightness set at -39 and Contrast set at 23, no other post work done as I was happy with the result.

     

    Autumn Rain Carrara setup.png
    2261 x 1046 - 812K
    Autumn Rain Contrast setup.png
    1774 x 944 - 886K
    Post edited by Bunyip02 on
  • UnifiedBrainUnifiedBrain Posts: 3,588

    Quick and easy, thanks Bunyip!

  • HeadwaxHeadwax Posts: 9,987

    I put the dummy light in because whenever I loaded up the rain with the attached lights the first light would lose its focus (meant to light up the rain objects) so I threw in the dummy to fix it

  • Bunyip02Bunyip02 Posts: 8,605
    Headwax_Carrara said:

    I put the dummy light in because whenever I loaded up the rain with the attached lights the first light would lose its focus (meant to light up the rain objects) so I threw in the dummy to fix it

    Hello Headwax, I assumed it was there for a reason, but I had to slowly delete/lower lights for Howie's scene as it was turning out too bright, will have to try it in a dark scene and see how it works.

  • HeadwaxHeadwax Posts: 9,987
    Bunyip02_Carrara said:
    Headwax_Carrara said:

    I put the dummy light in because whenever I loaded up the rain with the attached lights the first light would lose its focus (meant to light up the rain objects) so I threw in the dummy to fix it

    Hello Headwax, I assumed it was there for a reason, but I had to slowly delete/lower lights for Howie's scene as it was turning out too bright, will have to try it in a dark scene and see how it works.

    well the light in this looks superb!

     

  • HeadwaxHeadwax Posts: 9,987

    Image may contain: text, outdoor and water

     

    image revisited

     

  • HeadwaxHeadwax Posts: 9,987

    sorry UB just saw your comments , thank you :)

  • Rashad CarterRashad Carter Posts: 1,799
    Headwax_Carrara said:

    Hi, been working on this for a while. Just a simple rain storm with splashes and puddles. Would be ideal to use with Diomede's free trees.

    EDIT: Please find the beta files attached to this post. To use rename the files from txt files to car files.

    EDIT 2: Have uploaded new Storm Creek with Shaders removed (after  feedback)  - apologies

    Feel free to fine tune them or offer suggestions etc. Commercial renders fine of course. Any problems please let me know.

    I didn't include lightening etc. Maybe later ;)

     

    Instructions for use in the next post.

     

    Silly question, but how exactly do I download these files?

  • Bunyip02Bunyip02 Posts: 8,605
    Rashad Bryce-Carrara said:
    Headwax_Carrara said:

    Hi, been working on this for a while. Just a simple rain storm with splashes and puddles. Would be ideal to use with Diomede's free trees.

    EDIT: Please find the beta files attached to this post. To use rename the files from txt files to car files.

    EDIT 2: Have uploaded new Storm Creek with Shaders removed (after  feedback)  - apologies

    Feel free to fine tune them or offer suggestions etc. Commercial renders fine of course. Any problems please let me know.

    I didn't include lightening etc. Maybe later ;)

     

    Instructions for use in the next post.

     

    Silly question, but how exactly do I download these files?

    At the bottom of the very first post are 3 txt files, download them then rename the .txt to .car

    Have fun !!!

  • Bunyip02Bunyip02 Posts: 8,605
    Headwax_Carrara said:
    Bunyip02_Carrara said:
    Headwax_Carrara said:

    I put the dummy light in because whenever I loaded up the rain with the attached lights the first light would lose its focus (meant to light up the rain objects) so I threw in the dummy to fix it

    Hello Headwax, I assumed it was there for a reason, but I had to slowly delete/lower lights for Howie's scene as it was turning out too bright, will have to try it in a dark scene and see how it works.

    well the light in this looks superb!

     

    Thanks but you and Howie did all of the hard work !!!

  • StezzaStezza Posts: 8,055
    Rashad Bryce-Carrara said:
    Headwax_Carrara said:

    Hi, been working on this for a while. Just a simple rain storm with splashes and puddles. Would be ideal to use with Diomede's free trees.

    EDIT: Please find the beta files attached to this post. To use rename the files from txt files to car files.

    EDIT 2: Have uploaded new Storm Creek with Shaders removed (after  feedback)  - apologies

    Feel free to fine tune them or offer suggestions etc. Commercial renders fine of course. Any problems please let me know.

    I didn't include lightening etc. Maybe later ;)

     

    Instructions for use in the next post.

     

    Silly question, but how exactly do I download these files?

    not silly.. can be tricky if you haven't done it before..

    what I do is put the mouse pointer over the filename link.. Right Mouse click and 'Save Link As' ... then rename the file with the .CAR extension .. it will download to your selected option in your browser.. yes

  • Rashad CarterRashad Carter Posts: 1,799

    Bunyip, Stezza,

    Thanks. I've got it working now.

    Headwax,

    WOWOWOW! Looks very good. Thanks a ton for this tool!

  • CbirdCbird Posts: 493
    edited December 2018

     

    Fantastic Christmas present, thank you!

    I'm just starting work on a noir animation, so your timing is superb.

    It was raining in the city. A cold rain . . .

     

    city with rain.png
    1000 x 563 - 907K
    Post edited by Cbird on
  • ed3Ded3D Posts: 2,184
    Headwax_Carrara said:
    ed3D said:

    __and can this Be in Carrea 7 Pro ??

    should be okay, all the shaders are procedural so no mip mapping that I am aware of - let me know how you go

     

    _Alright Then,, Thanks

  • MistaraMistara Posts: 38,675

    looks really good.

     

    poor buppy laying out in the rain.

  • UnifiedBrainUnifiedBrain Posts: 3,588
    edited December 2018

    StormCreek was more challenging to understand than I thought going in.  It is a faily complex scene, with a lot of elements. Very Dartanbeck-esque.

    One file  - stormcreekwithshaders - would not load.  Not sure what it is supposed to do.

    The main file loads fine.  But I immediately discovered that it is very sluggish.  I attempt to rotate the scene by moving the mouse, and two seconds later, the scene begins to move.  Why is it so slow?  The render time is very slow as well.  Is it the surface replicators?  The Carrara hair plants?  Maybe my processor isn't powerful enough?  I tried selecting different elements in the file, but nothing seemed to help.  Note - I didn't try any of the synchronize camera stuff.

    The splashes file loaded easily, and was relativey easy to position on the water.  I raised it a bit too high on the following render, but that is easy to correct.

    In the render below, all I added was the tree to the preexisting elements in the scene, and some GMIC.  The render is not meant to be great art, but to show that the product works as advertised.  HW, nicely done!  Excellent effect, really nice morph package for the rain effect, and a very interesting terrain.  I need to figure out how to save out the rain and splashes so I can use them on other scenes.

    This will get a lot of use, thanks!

    HW StormCreek.png
    3000 x 1733 - 7M
    Post edited by UnifiedBrain on
  • HeadwaxHeadwax Posts: 9,987
    Rashad Bryce-Carrara said:

    Bunyip, Stezza,

    Thanks. I've got it working now.

    Headwax,

    WOWOWOW! Looks very good. Thanks a ton for this tool!

    great news! pleasure :) 

  • HeadwaxHeadwax Posts: 9,987
    Cbird said:

     

    Fantastic Christmas present, thank you!

    I'm just starting work on a noir animation, so your timing is superb.

    It was raining in the city. A cold rain . . .

     

    CBird, terrific render, looks amazing with those dark clouds. Merry Chrissie :) It was a cold and stormy night :)

     

    Mystarra said:

    looks really good.

     

    poor buppy laying out in the rain.

    yes but he/she is clean :) I think it is Rosie a free dog.

     

  • HeadwaxHeadwax Posts: 9,987
    edited December 2018
    UnifiedBrain said:

    StormCreek was more challenging to understand than I thought going in.  It is a faily complex scene, with a lot of elements. Very Dartanbeck-esque.

    One file  - stormcreekwithshaders - would not load.  Not sure what it is supposed to do.

    The main file loads fine.  But I immediately discovered that it is very sluggish.  I attempt to rotate the scene by moving the mouse, and two seconds later, the scene begins to move.  Why is it so slow?  The render time is very slow as well.  Is it the surface replicators?  The Carrara hair plants?  Maybe my processor isn't powerful enough?  I tried selecting different elements in the file, but nothing seemed to help.  Note - I didn't try any of the synchronize camera stuff.

    The splashes file loaded easily, and was relativey easy to position on the water.  I raised it a bit too high on the following render, but that is easy to correct.

    In the render below, all I added was the tree to the preexisting elements in the scene, and some GMIC.  The render is not meant to be great art, but to show that the product works as advertised.  HW, nicely done!  Excellent effect, really nice morph package for the rain effect, and a very interesting terrain.  I need to figure out how to save out the rain and splashes so I can use them on other scenes.

    This will get a lot of use, thanks!

    Hey Ub great stuff! Terrific with the tree. Thanks for that feedback.

    Argh, sorry it is slow, if you select the surface replicators they have 'mesh' selected in what they show (over on right)

    Just choose 'points' or 'none' and that should speed up the scene. 

    It renders pretty fast on my machine. (I hate slow renders) If I get a slowly rendering scene I usually delete all the lights - then just add one or two and see if that helps.

    I tried to make it at fast scene so none of the lights should have soft shadows etc. I opted for replicated meshes rather than transmapping the rain on a plain so I could add morphs to the rain drops. Maybe you could delete the replicated clouds I used for 'atmopshere' and that would speed up the renders?

    As for the rain by itself I thought I loaded it up seperately - sorry. I'll reupload it tonight or tomorrow. 

    regards from oz :)

     

    thanks to everyone who has tried this ! very happy seeing the resulting renders.

    Post edited by Headwax on
Sign In or Register to comment.