Genesis 3 and 8 to 9 Pose Converter (Commercial)

15678911»

Comments

  • ShimrianShimrian Posts: 533

    Splatterbaby said:

    Hi there. I got this pose converter from genesis3,8 to 9 and it used to work well. I added it to my toolbar and when I try load it up nothing happens. I tried deleting Daz and the plugin etc but it still does not work. Any advice here would help. Thanks

    You should have your G9 character and the pose selected when you select the script. The screenshot appears that you not have a pose selected in your content library, but I could be wrong.

  • I just purchased the product for doing batch poses.  When I  double-click it from the Scripts menu, I get the error, "Can't find the required base product: Genesis 3 & 8 to 9 Pose Converter. Please make sure it is installed before running the script."  I was able to run the Settings dialog box where I assigned a shortcut, but the shortcut gives the same error.

    It was indeed installed and "Genesis 3 & 8 To 9 Batch Pose Converter.dse" appears in my "C:\Daz 3D\Applications\Data\DAZ 3D\My DAZ 3D Library\Scripts\Genesis 3 & 8 to 9 Batch Pose Converter" folder.  What do I need to set to ensure the program is found when I double-click on it?

  • Here is the log file for my error mentioned above:

     

    2024-10-04 16:44:39.475 [INFO] :: Loading script: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter.dse
    2024-10-04 16:44:39.488 [DEBUG] :: 
    085cc16a-76b3-4c5a-828c-52aeada5a077

    ====================================================================================================
    G3 and G8 to G9 Batch Pose Converter 1.0 (Dev 8)
    ----------------------------------------------------------------------------------------------------
    OS: Windows 11, Build 22631, Workstation
    Bit Architecture: 64
    DS Version: 4.22.0.19
    DS Edition: Pro
    DS Release Cycle: General Release
    RKEY: 085cc16a-76b3-4c5a-828c-52aeada5a077
    Script: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter.dse

    ----------------------------------------------------------------------------------------------------

    2024-10-04 16:44:39.491 [DEBUG] :: #KWd6HB: Unable to find abs path for base product.
    2024-10-04 16:44:41.459 [DEBUG] :: #dY1w9Y: Original Pose Converter base product not found.
    2024-10-04 16:44:41.460 [INFO] :: Script executed successfully: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter.dse

  • Well if you guys aren't going to help me make your product work, I guess I will have to ask for my money back.

  • Zev0Zev0 Posts: 7,090
    edited October 16

    Hi. Sorry I don't always get notified of forum activity. Do you have the base product installed? It is a requirement. Your log says it cannot locate the base product.

    Post edited by Zev0 on
  • Zev0 said:

    Hi. Sorry I don't always get notified of forum activity. Do you have the base product installed? It is a requirement. Your log says it cannot locate the base product.

    I don't know how to determine if the base product is installed.  All I know is that I downloaded a file, IM00088686-01_Genesis3and8to9BatchPoseConverter.zip, from Daz and installed the items in the Content folder as I normally would.  I reinstalled it again this morning, but now the Settings script won't even display the dialog box.  When I tried it, I get this log file:

    2024-10-17 10:32:30.801 [INFO] :: Loading script: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter Launch Settings.dse
    2024-10-17 10:32:30.803 [DEBUG] :: ======================================================
    2024-10-17 10:32:30.803 [DEBUG] :: Pose Converter Launch Settings
    2024-10-17 10:32:30.803 [DEBUG] :: ======================================================
    2024-10-17 10:32:30.804 [DEBUG] :: #gK19ed: Custom Action Name:  G3 and G8 to G9 Batch Pose Converter
    2024-10-17 10:32:30.805 [DEBUG] :: #jwY7S1: Custom Action Index:  15
    2024-10-17 10:32:30.805 [DEBUG] :: #KOsoGa: Custom Action Shortcut: Ctrl+P
    2024-10-17 10:32:30.805 [DEBUG] :: #gK19ed: Custom Action Name:  G3 and G8 to G9 Batch Pose Converter
    2024-10-17 10:32:30.805 [DEBUG] :: #jwY7S1: Custom Action Index:  15
    2024-10-17 10:32:30.805 [DEBUG] :: #KOsoGa: Custom Action Shortcut: Ctrl+P
    2024-10-17 10:32:34.644 [INFO] :: Script executed successfully: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter Launch Settings.dse

    So it looks like the Settings script is executing, but it doesn't do anything.  If I run the app, I get this log file:

     

    ====================================================================================================
    G3 and G8 to G9 Batch Pose Converter 1.0 (Dev 8)
    ----------------------------------------------------------------------------------------------------
    OS: Windows 11, Build 22631, Workstation
    Bit Architecture: 64
    DS Version: 4.23.0.1
    DS Edition: Pro
    DS Release Cycle: General Release
    RKEY: 085cc16a-76b3-4c5a-828c-52aeada5a077
    Script: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter.dse

    ----------------------------------------------------------------------------------------------------

    2024-10-17 10:35:38.831 [DEBUG] :: #KWd6HB: Unable to find abs path for base product.
    2024-10-17 10:35:45.577 [DEBUG] :: #dY1w9Y: Original Pose Converter base product not found.


    I don't understand where it is trying to look for the product.

  • Note that I upgraded Daz Studio to Ver 4.23.01 yesterday.

  • Zev0Zev0 Posts: 7,090

    davidpratt14 said:

    Zev0 said:

    Hi. Sorry I don't always get notified of forum activity. Do you have the base product installed? It is a requirement. Your log says it cannot locate the base product.

    I don't know how to determine if the base product is installed.  All I know is that I downloaded a file, IM00088686-01_Genesis3and8to9BatchPoseConverter.zip, from Daz and installed the items in the Content folder as I normally would.  I reinstalled it again this morning, but now the Settings script won't even display the dialog box.  When I tried it, I get this log file:

    2024-10-17 10:32:30.801 [INFO] :: Loading script: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter Launch Settings.dse
    2024-10-17 10:32:30.803 [DEBUG] :: ======================================================
    2024-10-17 10:32:30.803 [DEBUG] :: Pose Converter Launch Settings
    2024-10-17 10:32:30.803 [DEBUG] :: ======================================================
    2024-10-17 10:32:30.804 [DEBUG] :: #gK19ed: Custom Action Name:  G3 and G8 to G9 Batch Pose Converter
    2024-10-17 10:32:30.805 [DEBUG] :: #jwY7S1: Custom Action Index:  15
    2024-10-17 10:32:30.805 [DEBUG] :: #KOsoGa: Custom Action Shortcut: Ctrl+P
    2024-10-17 10:32:30.805 [DEBUG] :: #gK19ed: Custom Action Name:  G3 and G8 to G9 Batch Pose Converter
    2024-10-17 10:32:30.805 [DEBUG] :: #jwY7S1: Custom Action Index:  15
    2024-10-17 10:32:30.805 [DEBUG] :: #KOsoGa: Custom Action Shortcut: Ctrl+P
    2024-10-17 10:32:34.644 [INFO] :: Script executed successfully: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter Launch Settings.dse

    So it looks like the Settings script is executing, but it doesn't do anything.  If I run the app, I get this log file:

     

    ====================================================================================================
    G3 and G8 to G9 Batch Pose Converter 1.0 (Dev 8)
    ----------------------------------------------------------------------------------------------------
    OS: Windows 11, Build 22631, Workstation
    Bit Architecture: 64
    DS Version: 4.23.0.1
    DS Edition: Pro
    DS Release Cycle: General Release
    RKEY: 085cc16a-76b3-4c5a-828c-52aeada5a077
    Script: C:/Daz 3D/Applications/Data/DAZ 3D/My DAZ 3D Library/Scripts/Genesis 3 & 8 to 9 Batch Pose Converter/Genesis 3 & 8 To 9 Batch Pose Converter.dse

    ----------------------------------------------------------------------------------------------------

    2024-10-17 10:35:38.831 [DEBUG] :: #KWd6HB: Unable to find abs path for base product.
    2024-10-17 10:35:45.577 [DEBUG] :: #dY1w9Y: Original Pose Converter base product not found.


    I don't understand where it is trying to look for the product.

    Base product needs to be purchased and installed. The batch converter is an addon for the base product, and requires the base product.

  • Zev0 said:

    Base product needs to be purchased and installed. The batch converter is an addon for the base product, and requires the base product.

    Oh goodness!  I didn't notice that there was a requirement for this product!  Of course, now I see what you mean by "base product"!  I will purchase it now.  Thanks for your patience with my absentmindedness. 

  • Zev0Zev0 Posts: 7,090

    NP. Thanks for the support.yes

  • Hi all- I'm having the same issue here... batch converter works fine, single pose converter does not. Windows 11, DS 4.23.  I don't use the connect / smart content in DS since I keep getting the "...valid PostgreSQL cms connection could not be established..." message on startup, so I can't even if I wanted to (no biggie there, my content library still works fine otherwise). These scripts are both installed on the same external drive via DIM (since I use several different HD's for content)-  Have uninstalled, reinstalled, cleared caches, etc. nothing seems to work thus far...?

    I checked the log file, and it appears that it's trying to locate/call the script on a different drive from where it's currently installed. I did originally have all my Genesis products on that drive, but had to move some to a new drive due to space. (and there have been DIM/user snafus in the midst of the changes). These scripts are in the batch that got moved. I'm going to try to manually remove the files (from the old location) listed in the "installed files" list in DIM, then unistall and reinstall to the new location again and see if that works...

    OK, that didn't work either. I've attached the screenshot of the log file where the warning shows up (about half way down). I ran the batch converter after, and it still works fine and calls the correct location (D:GenesisChars)

    Any help is appreciated! smiley  Thanks! ~Amy / featherwitch

     

     

    Screenshot 2024-11-05 161751.png
    2548 x 1561 - 261K
  • Hello, the script no longer works for me. I have tried to install a new one for daz3d studo 4.23 several times. It does not work and I do not get any error messages.

    I urgently need this script for my promo. -.-,

     

    I hope that there might be an update in the future...

     

    Chasoqueen

  • I have tried adding instructions.png to the suggested folder but I am still getting the error message about base pose converter not being found. The single pose converter works fine, I was just hoping to use the batch. Running Daz Studio 4.23.0.1

Sign In or Register to comment.