Freebie Challange----December: It's Steampunk at the North Pole---Main Thread

scatha

Not an entry

Captain: Helmsman, did I not say left at the denorius belt?

Helm: Did you now? Sorry was busy figuring out this steampunk christmas business at the freebie forum...

Andorian engineer in the back: Wake up, they said star wars, not star trek, you oaf. Besides, there's no room in here for a christmas tree and snow would ruin the carpet.

Helm: Hey, the oaf is at the weapons console, not flying the craft.

Klingon weapons officer: You and me are gonna have a few words later, flyboy.

Captain: Doc, you're going to be needed later, from the sounds of it. Now get us back on course, helmsman and stop bugging the klingon.

Helm: Aye, aye Cap'n...

 

MilosGulan

Thanks for the link Dollygirl, amazing freebies there :)

@Skywalker77 Yeah I like it too. It is my second time to use T2 in this challenge but this time I finaly made it completely work, i mean additional textures, mat files for few of them doesn't work so I needed to apply them manualy. It is really a nice one, can be used for many things and it has that Fallout look :). For Steambike Pro it was freebie before but I am not sure if it was free this month.

 

 

 

nitehawk_ltd

Skywalker77 said:

I never thought to use the sheet and use it as a hill - I'll have to remember that trick.  Nice work!  That puts a new meaning to a "blanket of snow."  

What texture did to apply to it?  It looks great!

The snow and ice textures I got from Hobo Bo on ShareCG, but the links are bad. Looks like he took a lot of his textures down.

Saphirewild

Here is yet another Steampunk Party!!!

Title: Steampunk X-Mas Party House

Software: Daz Studio 4.9, Post Work in PSP9

Word Board #13 Down the List

Santa Hat #7 Down The List

Steampunk Tree

Santa Tubes Day 13

gifts  #5 Down The List

stocking  #7 Down the List

Table, Chairs, Dishes, Candle stick with Candles,

Cat

Dog

Macaw

Akio Tubes Day 21

Snow on the ground #3 Down The List

DanaTA

scatha said:

Not an entry

Captain: Helmsman, did I not say left at the denorius belt?

Helm: Did you now? Sorry was busy figuring out this steampunk christmas business at the freebie forum...

Andorian engineer in the back: Wake up, they said star wars, not star trek, you oaf. Besides, there's no room in here for a christmas tree and snow would ruin the carpet.

Helm: Hey, the oaf is at the weapons console, not flying the craft.

Klingon weapons officer: You and me are gonna have a few words later, flyboy.

Captain: Doc, you're going to be needed later, from the sounds of it. Now get us back on course, helmsman and stop bugging the klingon.

Helm: Aye, aye Cap'n...

 

 

There's a lot of wood in there.  Not something I'd expect in a spaceship!  Looks classy, though.

Dana

DanaTA

Saphirewild said:

Here is yet another Steampunk Party!!!

Title: Steampunk X-Mas Party House

Software: Daz Studio 4.9, Post Work in PSP9

Wow, the wall is alive with light!  That window showing the snow outside becomes rather surreal.  And Hein is there!    That is a wild party!

Dana

Saphirewild

DanaTA said:

Saphirewild said:

Here is yet another Steampunk Party!!!

Title: Steampunk X-Mas Party House

Software: Daz Studio 4.9, Post Work in PSP9

Wow, the wall is alive with light!  That window showing the snow outside becomes rather surreal.  And Hein is there!    That is a wild party!

Dana

Yeah was trying to make it more party like on the walls so used a shader Mix and a texture on the wall, I think got the right mix of peeps in this render even got Steampunk Dolly on the table dancing it up giggles!!!

MilosGulan

nitehawk_ltd said:

Skywalker77 said:

I never thought to use the sheet and use it as a hill - I'll have to remember that trick.  Nice work!  That puts a new meaning to a "blanket of snow."  

What texture did to apply to it?  It looks great!

The snow and ice textures I got from Hobo Bo on ShareCG, but the links are bad. Looks like he took a lot of his textures down.

Thanks for the info I better get what I can now. I was also wondering how You did the ice :) nice work.

 

@Scatha Nice work, really amazing. Now when Dana mentioned I noticed wood :)

Chelle the Cat

Skywalker77 said:

Chelle the Cat said:

I both love and hate this time of year  so much to do, and it feels like there is just NOT enough time for it all. Anyone know where I can apply for an extra few hours for my days? hehe I'm still working on my image when I can spare the time - hopefully will get it done.

LOL... there is a place to apply but you'll have to wait in line and there's no guarantee they won't run out by the time you get to the window.  

LMAO Story of my life! Ah well 

scatha

DanaTA said:

scatha said:

Not an entry

Captain: Helmsman, did I not say left at the denorius belt?

Helm: Did you now? Sorry was busy figuring out this steampunk christmas business at the freebie forum...

Andorian engineer in the back: Wake up, they said star wars, not star trek, you oaf. Besides, there's no room in here for a christmas tree and snow would ruin the carpet.

Helm: Hey, the oaf is at the weapons console, not flying the craft.

Klingon weapons officer: You and me are gonna have a few words later, flyboy.

Captain: Doc, you're going to be needed later, from the sounds of it. Now get us back on course, helmsman and stop bugging the klingon.

Helm: Aye, aye Cap'n...

 

 

There's a lot of wood in there.  Not something I'd expect in a spaceship!  Looks classy, though.

Dana

Thanks Dana, made it like that to give it more of a steampunk feel, together with the copper.  :)

Thanks Milos. :)

Odaa

Scatha: that the defiant-class bridge?  Looks right snazzy with the wood and copper and retro computer graphics.

 

Here's my entry:

Title: Steampunk Santa

Setup and Rendered in: DS 4.7

Postwork: fixed some visible seams (on the tuxedo coat for instance, or blending the place where the hair and beard joined) and pokethrough, tweaked lighting/color palette to be more dynamic, added snow.  All in the free program paint.net.  The original render wouldn't fit in this post because both pics are very large.  Will post the original in a followup post.

No-count items: Michael 4 and his Morphs++ addon, various primitives used to create the "reindeer" harness.

Freebies no longer available: Teresa Tyllo used to have a rusty camo themed texture resource freebie which I used in texturing the Adrian helmet and Hailey's Comet in the freebies listed below.

Paid items: M4 Beard and M4 Tuxedo from daz3d.com; Hailey's Comet the Robot Horse from Runtime DNA (although I bought it at Renderosity IIRC, I think the PA changed shops).

Free items:

Renderosity website (requires registration):

1. Truform Christmas Presents: https://www.renderosity.com/mod/freestuff/christmas-presents/75965

2. PhilC's Steampunk Balloon: https://www.renderosity.com/mod/freestuff/steampunk-balloon/73264

Sharecg website (requires registration):

3. Dieselpunk texture for Hailey's Comet, by me: http://www.sharecg.com/v/51315/gallery/11/Poser/Dieselpunk-for-Haileys-Comet

4. WWI Adrian Helmet for M4, by me: http://www.sharecg.com/v/58453/gallery/11/Poser/Steampunk-Adrian-Helmet-WWI

5. Tabbycat's Comet poses: http://www.sharecg.com/v/40162/gallery/11/poser/haileys-comet-poses

6. Groovemaster's Shader Pack 3 (used to texture the brasswork on the balloon plus the "harness" primitives and the antlers): http://www.sharecg.com/v/46307/gallery/7/Material-and-Shader/Shader-Pack-3-for-Daz-Studio-3

7. Josea's Antler prop: http://www.sharecg.com/v/48156/gallery/5/3D-Model/Antlers

8. Fober's The Hills (scenery): http://www.sharecg.com/v/39996/gallery/11/Poser/The-Hills-environment-for-DAZ-Studio-Poser

No registration required:

9. Chohole's textures for M4 tuxedo (scroll down slightly, they come right after her textures for the Edwardian Suit for M3): http://chohole.ovbi.org/page_8.htm

10. Optitex Dynamic Garbage Bag (tinted red in surface tab): http://www.optitex-dynamiccloth.com/FreebieDownload15.php

11. Calida's Snow Shaders (used on scenery): http://www.calida3d.com/DSFree08_MAT.shtml

May or may not count due to unclear visibility, both are from sharecg and require registration:

12. Unicornst's Nick for M4 (skin used on M4 with dialspun Morphs++ face created for this project, multi-part download, see titles of links): http://www.sharecg.com/v/38154/gallery/21/DAZ-Studio/Nicholas-for-M4-Part01 ;

http://www.sharecg.com/v/38155/gallery/21/DAZ-Studio/Nicholas-for-M4-Part02 ;

http://www.sharecg.com/v/38156/gallery/21/DAZ-Studio/Nicholas-for-M4-Part03

13): Varsel 18th c. wig for M4 (resized and repositioned to fit under helmet): http://www.sharecg.com/v/36478/gallery/11/Poser/18.th-century-Wig

Odaa

And here's the original render.

DanaTA

Odaa said:

Scatha: that the defiant-class bridge?  Looks right snazzy with the wood and copper and retro computer graphics.

 

Here's my entry:

Title: Steampunk Santa

Setup and Rendered in: DS 4.7

Postwork: fixed some visible seams (on the tuxedo coat for instance, or blending the place where the hair and beard joined) and pokethrough, tweaked lighting/color palette to be more dynamic, added snow.  All in the free program paint.net.  The original render wouldn't fit in this post because both pics are very large.  Will post the original in a followup post.

No-count items: Michael 4 and his Morphs++ addon, various primitives used to create the "reindeer" harness.

Freebies no longer available: Teresa Tyllo used to have a rusty camo themed texture resource freebie which I used in texturing the Adrian helmet and Hailey's Comet in the freebies listed below.

Paid items: M4 Beard and M4 Tuxedo from daz3d.com; Hailey's Comet the Robot Horse from Runtime DNA (although I bought it at Renderosity IIRC, I think the PA changed shops).

Free items:

Renderosity website (requires registration):

1. Truform Christmas Presents: https://www.renderosity.com/mod/freestuff/christmas-presents/75965

2. PhilC's Steampunk Balloon: https://www.renderosity.com/mod/freestuff/steampunk-balloon/73264

Sharecg website (requires registration):

3. Dieselpunk texture for Hailey's Comet, by me: http://www.sharecg.com/v/51315/gallery/11/Poser/Dieselpunk-for-Haileys-Comet

4. WWI Adrian Helmet for M4, by me: http://www.sharecg.com/v/58453/gallery/11/Poser/Steampunk-Adrian-Helmet-WWI

5. Tabbycat's Comet poses: http://www.sharecg.com/v/40162/gallery/11/poser/haileys-comet-poses

6. Groovemaster's Shader Pack 3 (used to texture the brasswork on the balloon plus the "harness" primitives and the antlers): http://www.sharecg.com/v/46307/gallery/7/Material-and-Shader/Shader-Pack-3-for-Daz-Studio-3

7. Josea's Antler prop: http://www.sharecg.com/v/48156/gallery/5/3D-Model/Antlers

8. Fober's The Hills (scenery): http://www.sharecg.com/v/39996/gallery/11/Poser/The-Hills-environment-for-DAZ-Studio-Poser

No registration required:

9. Chohole's textures for M4 tuxedo (scroll down slightly, they come right after her textures for the Edwardian Suit for M3): http://chohole.ovbi.org/page_8.htm

10. Optitex Dynamic Garbage Bag (tinted red in surface tab): http://www.optitex-dynamiccloth.com/FreebieDownload15.php

11. Calida's Snow Shaders (used on scenery): http://www.calida3d.com/DSFree08_MAT.shtml

May or may not count due to unclear visibility, both are from sharecg and require registration:

12. Unicornst's Nick for M4 (skin used on M4 with dialspun Morphs++ face created for this project, multi-part download, see titles of links): http://www.sharecg.com/v/38154/gallery/21/DAZ-Studio/Nicholas-for-M4-Part01 http://www.sharecg.com/v/38155/gallery/21/DAZ-Studio/Nicholas-for-M4-Part02 http://www.sharecg.com/v/38156/gallery/21/DAZ-Studio/Nicholas-for-M4-Part03

13): Varsel 18th c. wig for M4 (resized and repositioned to fit under helmet): http://www.sharecg.com/v/36478/gallery/11/Poser/18.th-century-Wig

Well, that's an interesting mode of transportation.  Music giving flight!

Dana

MilosGulan

That looks great :)

Odaa

Milos: Thank you! :)

Dana: PhilC's notes on the Steampunk Balloon say that the victrola is generating hot air by playing a reocrding of political speeches ;)

DanaTA

Odaa said:

Milos: Thank you! :)

Dana: PhilC's notes on the Steampunk Balloon say that the victrola is generating hot air by playing a reocrding of political speeches ;)

Oh!      That works, too!   

Dana

mjc1016

Odaa said:

Scatha: that the defiant-class bridge?  Looks right snazzy with the wood and copper and retro computer graphics.

 

Here's my entry:

Title: Steampunk Santa

Setup and Rendered in: DS 4.7

Postwork: fixed some visible seams (on the tuxedo coat for instance, or blending the place where the hair and beard joined) and pokethrough, tweaked lighting/color palette to be more dynamic, added snow.  All in the free program paint.net.  The original render wouldn't fit in this post because both pics are very large.  Will post the original in a followup post.

No-count items: Michael 4 and his Morphs++ addon, various primitives used to create the "reindeer" harness.

Freebies no longer available: Teresa Tyllo used to have a rusty camo themed texture resource freebie which I used in texturing the Adrian helmet and Hailey's Comet in the freebies listed below.

Paid items: M4 Beard and M4 Tuxedo from daz3d.com; Hailey's Comet the Robot Horse from Runtime DNA (although I bought it at Renderosity IIRC, I think the PA changed shops).

Free items:

Renderosity website (requires registration):

1. Truform Christmas Presents: https://www.renderosity.com/mod/freestuff/christmas-presents/75965

2. PhilC's Steampunk Balloon: https://www.renderosity.com/mod/freestuff/steampunk-balloon/73264

Sharecg website (requires registration):

3. Dieselpunk texture for Hailey's Comet, by me: http://www.sharecg.com/v/51315/gallery/11/Poser/Dieselpunk-for-Haileys-Comet

4. WWI Adrian Helmet for M4, by me: http://www.sharecg.com/v/58453/gallery/11/Poser/Steampunk-Adrian-Helmet-WWI

5. Tabbycat's Comet poses: http://www.sharecg.com/v/40162/gallery/11/poser/haileys-comet-poses

6. Groovemaster's Shader Pack 3 (used to texture the brasswork on the balloon plus the "harness" primitives and the antlers): http://www.sharecg.com/v/46307/gallery/7/Material-and-Shader/Shader-Pack-3-for-Daz-Studio-3

7. Josea's Antler prop: http://www.sharecg.com/v/48156/gallery/5/3D-Model/Antlers

8. Fober's The Hills (scenery): http://www.sharecg.com/v/39996/gallery/11/Poser/The-Hills-environment-for-DAZ-Studio-Poser

No registration required:

9. Chohole's textures for M4 tuxedo (scroll down slightly, they come right after her textures for the Edwardian Suit for M3): http://chohole.ovbi.org/page_8.htm

10. Optitex Dynamic Garbage Bag (tinted red in surface tab): http://www.optitex-dynamiccloth.com/FreebieDownload15.php

11. Calida's Snow Shaders (used on scenery): http://www.calida3d.com/DSFree08_MAT.shtml

May or may not count due to unclear visibility, both are from sharecg and require registration:

12. Unicornst's Nick for M4 (skin used on M4 with dialspun Morphs++ face created for this project, multi-part download, see titles of links): http://www.sharecg.com/v/38154/gallery/21/DAZ-Studio/Nicholas-for-M4-Part01 http://www.sharecg.com/v/38155/gallery/21/DAZ-Studio/Nicholas-for-M4-Part02 http://www.sharecg.com/v/38156/gallery/21/DAZ-Studio/Nicholas-for-M4-Part03

13): Varsel 18th c. wig for M4 (resized and repositioned to fit under helmet): http://www.sharecg.com/v/36478/gallery/11/Poser/18.th-century-Wig

The links are fine, entry accepted...the skin likns are running together though and should have a couple of spaces inserted or put on different lines.

Saphirewild

Does my second one check out yet Mjc?

mjc1016

Yes, I thought I made post for it but it looks like too much eggnog got in the way.

Saphirewild

mjc1016 said:

Yes, I thought I made post for it but it looks like too much eggnog got in the way.

Giggles maybe it is time for some good ole coffee now Mjc???

I know I need some badly to gets over my eggnog hangover!!!!

Odaa

Thank you, I have made the changes and will post in the other thread.

Sky77

Wow, I didn't think I was going to make it this month!   I tell you, the holidays should not occur during the holiday season!  This was a really fun challenge for me and a lot of learning, starting with the Steampunk theme itself!  Special thanks to Chelle the Cat for all the great information and ideas and to Chohole for that link to that awesome video!

Well enough about my story, on to the render!... Santa's daughter decides to "modernize" the family business... wait 'til daddy finds out!

Title:  Ms. Claus' Workshop

Freebies:
http://www.artraiders.com/download_page.php?file_id=163 lassie of the seas outfit
http://www.sharecg.com/v/35553/gallery/11/Poser/Dusk-and-Dawn dusk and dawn corset dress by jan19
http://www.artraiders.com/download_page.php?file_id=135 sexy leather outfit v4
http://www.sharecg.com/v/63033/browse/11/Poser/steampumk_glasses glasses
http://www.sharecg.com/v/15881/gallery/11/Poser/V3-Lady-Jane lady Jane Hair for V3
http://www.sharecg.com/v/30666/browse/11/Poser/Rudolph rudolph
http://forum.runtimedna.com/downloads.php?do=file&id=723 elf  Stixx McGee
http://www.poserdirect.com/free_fanarts.html minion (near bottom of page)
http://www.poserdirect.com/free_steampunkcomp.html steam punk computer
http://forum.runtimedna.com/downloads.php?do=file&id=722 gift boxes
http://www.sharecg.com/v/24133/browse/11/Poser/Mongol-Tack-for-the-P4-Horse tack bridle p4 horse
http://forum.runtimedna.com/downloads.php?do=file&id=734 cranksville toy factory
http://www.sharecg.com/v/58818/gallery/11/Poser/Steampunk-Pipe-Accessories-Part-2-Gauges gauges
http://www.sharecg.com/v/46529/browse/5/3D-Model/Air-Kraken-Barometer  barometer
http://www.sharecg.com/v/43720/gallery/5/3D-Model/The-Switch the switch
http://forum.runtimedna.com/downloads.php?do=file&id=701 rocket sled
http://www.sharecg.com/v/46377/browse/5/3D-Model/Steampunk-Style-Lever the lever
http://www.sharecg.com/v/68935/browse/6/Texture/Free-tiling-textures-pack-44 Nobiax wood textures
http://www.sharecg.com/v/54381/browse/6/Texture/material_wood_pack_1 more wood textures

http://shop.aprilsvanity.com/corset-hat.html corset hat (link fixed:  Thanks again, MJC!)

No Count Item:
http://www.artraiders.com/download_page.php?file_id=350 Syltermermaid - Kitty (no count as I am not able verify the downloadability at 4Shared site - too many fake download buttons)

Purchased item:

Reality 4 plug in for DAZ Studio

 

Postwork:
Had to blow out some fireflies on Rudolph - haven't quite figured out how to use some of the special shaders for Reality
Fixed a little poke through in Ms. Claus' dress.
Added signature

 

DollyGirl

What Do You See?
NAE

My attempt at Steampunk at the North Pole. Rendered with Iray. No postwork except for signature. Line drawing clock in background is a spline model I made in Carrara.

Freebies:
Environment: Planet Salashin Environments by Salashin
Environment: Telescope * Technophilia Arcane: Star Scope by Traveler
Environment: Wall DM's Wall of Litany by DM Productions
Environment:Background * Multi-Plane Space Tool by Bad Faerie
Environment:Garland:Wreath * Garland and Ornaments by Traveler
Environment:Santa * Steampunk Balloon by PhilC
No ToyZ * No ToyZ by Traveler
Nutcracker:Vechile * Mechanical Bird by unknown. Requires Poseray to convert to obj
Nutcracker * Nutcracker by Traveler
Shaders:Dress Steampunk Materials by redeyecat
Victoria:Clothing:Cape * Cosplay Costume for V4 by Terrymcg
Victoria:Clothing:Dress * Pearl part 1 for V4 by Arah018
Victoria:Clothing:Dress * Pearl part 2 for V4 by Arah018
Victoria:Clothing:Jacket * Texture Challenge 6 by Sanbie
Victoria:Clothing:Overskirt * Cortigiana by Jan Jan19
Victoria:Clothing:Stockings Thigh-Length Stockings for V4, A4, and G4 by Little Dragon
Victoria:Clothings:Boots * Crystal Boots by Prae
Victoria:Hair * Komachi Hair by Fujiko

No Longer Available:

Environment:Clock Antique Clock by PhilC
Environment:Balister Mansion Staircase by Redhouse Studios
Environment:Stacks Piggy Crowns by Jordi R. Cardona. The crown sits on top of a DAZ primative cylinder
Environment:Stool, Victoria:Pose Newsletter Freebie February 2011 by ironman13
Environment:Telescope:Pillar -----the-fantastic-empire by MatCreator.

No Counts:

Software: Conversion PoseRay by flyerx. Used to convert .3ds files to obj files
Victoria:Base * Victoria 4.2 Base by DAZ 3D

Paid Fors:

No ToyZ:Ladder * The Ladder Collection by DAZ 3D ArtCollab.

 

mjc1016

Skywalker77 said:

Wow, I didn't think I was going to make it this month!   I tell you, the holidays should not occur during the holiday season!  This was a really fun challenge for me and a lot of learning, starting with the Steampunk theme itself!  Special thanks to Chelle the Cat for all the great information and ideas and to Chohole for that link to that awesome video!

Well enough about my story, on to the render!... Santa's daughter decides to "modernize" the family business... wait 'til daddy finds out!

Title:  Ms. Claus' Workshop

Freebies:
http://www.artraiders.com/download_page.php?file_id=163 lassie of the seas outfit
http://www.sharecg.com/v/35553/gallery/11/Poser/Dusk-and-Dawn dusk and dawn corset dress by jan19
http://www.artraiders.com/download_page.php?file_id=135 sexy leather outfit v4
http://www.sharecg.com/v/63033/browse/11/Poser/steampumk_glasses glasses
http://www.sharecg.com/v/15881/gallery/11/Poser/V3-Lady-Jane lady Jane Hair for V3
http://www.sharecg.com/v/30666/browse/11/Poser/Rudolph rudolph
http://forum.runtimedna.com/downloads.php?do=file&id=723 elf  Stixx McGee
http://www.poserdirect.com/free_fanarts.html minion (near bottom of page)
http://www.poserdirect.com/free_steampunkcomp.html steam punk computer
http://forum.runtimedna.com/downloads.php?do=file&id=722 gift boxes
http://www.sharecg.com/v/24133/browse/11/Poser/Mongol-Tack-for-the-P4-Horse tack bridle p4 horse
http://forum.runtimedna.com/downloads.php?do=file&id=734 cranksville toy factory
http://www.sharecg.com/v/58818/gallery/11/Poser/Steampunk-Pipe-Accessories-Part-2-Gauges gauges
http://www.sharecg.com/v/46529/browse/5/3D-Model/Air-Kraken-Barometer  barometer
http://www.sharecg.com/v/43720/gallery/5/3D-Model/The-Switch the switch
http://forum.runtimedna.com/downloads.php?do=file&id=701 rocket sled
http://www.sharecg.com/v/46377/browse/5/3D-Model/Steampunk-Style-Lever the lever
http://www.sharecg.com/v/68935/browse/6/Texture/Free-tiling-textures-pack-44 Nobiax wood textures
http://www.sharecg.com/v/54381/browse/6/Texture/material_wood_pack_1 more wood textures

 

No Count Item:
http://www.artraiders.com/download_page.php?file_id=350 Syltermermaid - Kitty (no count as I am not able verify the downloadability at 4Shared site - too many fake download buttons)

http://www.daz3d.com/corset-hat corset hat (was there for a few weeks but now is gone)

Purchased item:
Reality 4 plug in for DAZ Studio

 

Postwork:
Had to blow out some fireflies on Rudolph - haven't quite figured out how to use some of the special shaders for Reality
Fixed a little poke through in Ms. Claus' dress.
Added signature

 

The links check out...

The Corset Hat is this year's Christmas Freebie and another link for it is...

http://shop.aprilsvanity.com/corset-hat.html (she usually puts all her gifts up on her site)

So I'm counting it (not that you really need it, for a listing).

mjc1016

DollyGirl said:

What Do You See?
NAE

My attempt at Steampunk at the North Pole. Rendered with Iray. No postwork except for signature. Line drawing clock in background is a spline model I made in Carrara.

Freebies:
Environment: Planet Salashin Environments by Salashin
Environment: Telescope * Technophilia Arcane: Star Scope by Traveler
Environment: Wall DM's Wall of Litany by DM Productions
Environment:Background * Multi-Plane Space Tool by Bad Faerie
Environment:Balister * Mansion Staircase by Redhouse Studios
Environment:Garland:Wreath * Garland and Ornaments by Traveler
Environment:Santa * Steampunk Balloon by PhilC
Environment:Stacks * Piggy Crowns by Jordi R. Cardona. The crown sits on top of a DAZ primative cylinder
No ToyZ * No ToyZ by Traveler
Nutcracker:Vechile * Mechanical Bird by unknown. Requires Poseray to convert to obj
Nutcracker * Nutcracker by Traveler
Shaders:Dress Steampunk Materials by redeyecat
Victoria:Clothing:Cape * Cosplay Costume for V4 by Terrymcg
Victoria:Clothing:Dress * Pearl part 1 for V4 by Arah018
Victoria:Clothing:Dress * Pearl part 2 for V4 by Arah018
Victoria:Clothing:Jacket * Texture Challenge 6 by Sanbie
Victoria:Clothing:Overskirt * Cortigiana by Jan Jan19
Victoria:Clothing:Stockings Thigh-Length Stockings for V4, A4, and G4 by Little Dragon
Victoria:Clothings:Boots * Crystal Boots by Prae
Victoria:Hair * Komachi Hair by Fujiko

No Longer Available:

Environment:Clock Antique Clock by PhilC
Environment:Stool, Victoria:Pose Newsletter Freebie February 2011 by ironman13
Environment:Telescope:Pillar -----the-fantastic-empire by MatCreator.

No Counts:

Software: Conversion PoseRay by flyerx. Used to convert .3ds files to obj files
Victoria:Base * Victoria 4.2 Base by DAZ 3D

Paid Fors:

No ToyZ:Ladder * The Ladder Collection by DAZ 3D ArtCollab.

 

Nice one...

nitehawk_ltd

DollyGirl said:

What Do You See?
NAE

Environment:Balister * Mansion Staircase by Redhouse Studios
Environment:Stacks * Piggy Crowns by Jordi R. Cardona. The crown sits on top of a DAZ primative cylinder

These two links are broken.
Other than that, this is a very interesting render.

DanaTA

Skywalker77 said:

Wow, I didn't think I was going to make it this month!   I tell you, the holidays should not occur during the holiday season!  This was a really fun challenge for me and a lot of learning, starting with the Steampunk theme itself!  Special thanks to Chelle the Cat for all the great information and ideas and to Chohole for that link to that awesome video!

Well enough about my story, on to the render!... Santa's daughter decides to "modernize" the family business... wait 'til daddy finds out!

Title:  Ms. Claus' Workshop

 

Aww, poor Rudolph is being replaced by technology!

Dana

DanaTA

DollyGirl said:

What Do You See?
NAE

My attempt at Steampunk at the North Pole. Rendered with Iray. No postwork except for signature. Line drawing clock in background is a spline model I made in Carrara.

 

Why NAE?  There are certainly enough freebies!  A wonderfully interestng piece!  What does she see?

Dana

DollyGirl

Well Dana, it is NAE cause I want to. I love doing the challenge and I am happy I get to submit something but I don't need to compete any more. But thank you. I have never had a piece called interesting. I like that description. And what does she see? Well it is Christmas eve so maybe .....Santa??????

Nitehawk, thank you and thanks for the heads up. I fixed my database and the post. Could have sworn that the piggy crowns were up and running but it was at the begining of the month when I checked. StaceyG no longer has anything on Rendo, to bad it was a fun little prop. The Balister was a DAZ freebie from the old site. I forgot to remove the link from the database and like most computers it just did what I told it to and created the line item. Silly me. Might be able to get Jack Tomalin to reupload this one. It has pillars, grand stairs and the ballisters.

mjc, thank you. Things are sort of getting back to normal, if you can call it that and I find this to be a distraction for a bit and helps me. thanks for hosting this month. Good luck everyone.

Sky77

mjc1016 said:

Skywalker77 said:

Wow, I didn't think I was going to make it this month!   I tell you, the holidays should not occur during the holiday season!  This was a really fun challenge for me and a lot of learning, starting with the Steampunk theme itself!  Special thanks to Chelle the Cat for all the great information and ideas and to Chohole for that link to that awesome video!

Well enough about my story, on to the render!... Santa's daughter decides to "modernize" the family business... wait 'til daddy finds out!

Title:  Ms. Claus' Workshop

Freebies:
http://www.artraiders.com/download_page.php?file_id=163 lassie of the seas outfit
http://www.sharecg.com/v/35553/gallery/11/Poser/Dusk-and-Dawn dusk and dawn corset dress by jan19
http://www.artraiders.com/download_page.php?file_id=135 sexy leather outfit v4
http://www.sharecg.com/v/63033/browse/11/Poser/steampumk_glasses glasses
http://www.sharecg.com/v/15881/gallery/11/Poser/V3-Lady-Jane lady Jane Hair for V3
http://www.sharecg.com/v/30666/browse/11/Poser/Rudolph rudolph
http://forum.runtimedna.com/downloads.php?do=file&id=723 elf  Stixx McGee
http://www.poserdirect.com/free_fanarts.html minion (near bottom of page)
http://www.poserdirect.com/free_steampunkcomp.html steam punk computer
http://forum.runtimedna.com/downloads.php?do=file&id=722 gift boxes
http://www.sharecg.com/v/24133/browse/11/Poser/Mongol-Tack-for-the-P4-Horse tack bridle p4 horse
http://forum.runtimedna.com/downloads.php?do=file&id=734 cranksville toy factory
http://www.sharecg.com/v/58818/gallery/11/Poser/Steampunk-Pipe-Accessories-Part-2-Gauges gauges
http://www.sharecg.com/v/46529/browse/5/3D-Model/Air-Kraken-Barometer  barometer
http://www.sharecg.com/v/43720/gallery/5/3D-Model/The-Switch the switch
http://forum.runtimedna.com/downloads.php?do=file&id=701 rocket sled
http://www.sharecg.com/v/46377/browse/5/3D-Model/Steampunk-Style-Lever the lever
http://www.sharecg.com/v/68935/browse/6/Texture/Free-tiling-textures-pack-44 Nobiax wood textures
http://www.sharecg.com/v/54381/browse/6/Texture/material_wood_pack_1 more wood textures

 

No Count Item:
http://www.artraiders.com/download_page.php?file_id=350 Syltermermaid - Kitty (no count as I am not able verify the downloadability at 4Shared site - too many fake download buttons)

http://www.daz3d.com/corset-hat corset hat (was there for a few weeks but now is gone)

Purchased item:
Reality 4 plug in for DAZ Studio

 

Postwork:
Had to blow out some fireflies on Rudolph - haven't quite figured out how to use some of the special shaders for Reality
Fixed a little poke through in Ms. Claus' dress.
Added signature

 

The links check out...

The Corset Hat is this year's Christmas Freebie and another link for it is...

http://shop.aprilsvanity.com/corset-hat.html (she usually puts all her gifts up on her site)

So I'm counting it (not that you really need it, for a listing).

Cool!  Thanks for the new link!  I will update it on my original post here and for the entry thread.