Loading...
> >

Bend Control for Genesis 3 Females and Males (Commercial)

245

Comments

  • Zev0Zev0 Posts: 7,089

    Do you have Shape Shift? It has belly button options. You can also turn off limits and dial in the negative. Is there something specific you are looking at shape wise?

  • nicsttnicstt Posts: 11,715
    Zev0 said:

    Do you have Shape Shift? It has belly button options. You can also turn off limits and dial in the negative. Is there something specific you are looking at shape wise?

    I'd forgotten about those.:)

  • barbultbarbult Posts: 24,245

    Yah, I have so much Zev0 stuff now, I can't even remember it all. With morphs, you can't just go find them in the Products section of Content Library.

  • Zev0Zev0 Posts: 7,089
    edited March 2016

    Lol it's why I use the search bar sometimes. Half the time I can't even remember some stuff I made lol.

    Post edited by Zev0 on
  • takezo_3001takezo_3001 Posts: 1,979
    Zev0 said:

    Here are some Promos. Busy wrapping this up.

    This, This is why I'm gonna snag this as soon as it comes out!

    I have been trying to properly get that thigh bend since v4, and yet here it is! It's the reason why I got genesis to begin with!

    Thanks again Zev0...Now I won't be able to sleep until april xD

  • Rod Wise DriggoRod Wise Driggo Posts: 2,211

    So finally, Bend Control and Glute Control in April then. Looking more than forward to it. Maybe quickly followed by that suggested Nipple Control? Guess you'll offer some nice discounts for owners of Breast Control? That would make things even better. And if you find the time a little "Hey-this-little-dial-will-make-your-render-look-awsome"-Control will also be greatly appreciated ;-)

    BTW did a little check and was not surprised that I own every Zev0 Gen3-product and nearly every Gen2-product as well. So I strongly suggest DAZ should throw lots of money at Zev0 to include all kinds of Zev0-morphs into Gen4 from the get-go. Otherwise I might wait with upgrading until the Zev0-Morphs are there ;-)

     

  • Zev0Zev0 Posts: 7,089

    LOL I do not want to hear about any G4 anytime soon......

  • jakkujakku Posts: 91

    Impressive work :)

    Thanks for making this great product Zev0

    It is easy to see that you take great pride in your products, down to the smallest detail.

    Crazy to think that all this time the figures were not even reaching their full potential.

    DAZ is so lazy :p

  • takezo_3001takezo_3001 Posts: 1,979
    edited March 2016
    Jakku said:

    Impressive work :)

    Thanks for making this great product Zev0

    It is easy to see that you take great pride in your products, down to the smallest detail.

    Crazy to think that all this time the figures were not even reaching their full potential.

    DAZ is so lazy :p

    I for one am glad DAZ is "lazy," as they would've charged twice as much for these morphs, plus, I love Zev0's work as well...Often times You need an outside perspective for an inside problem anyways as they usually offer the better solution!

    Post edited by takezo_3001 on
  • jakkujakku Posts: 91

    Hehe, yes I guess you are right :)

  • Daywalker DesignsDaywalker Designs Posts: 3,586
    takezo_3001 said:
    Jakku said:

    Impressive work :)

    Thanks for making this great product Zev0

    It is easy to see that you take great pride in your products, down to the smallest detail.

    Crazy to think that all this time the figures were not even reaching their full potential.

    DAZ is so lazy :p

    I for one am glad DAZ is lazy, as they would've charged twice as much for these morphs, plus, I love Zev0's work as well...Often times You need an outside perspective for an inside problem anyways as they usually offer the better solution!

    I'm not sure it's laziness; it may well be that it ended up being lower priority than other stuff for DAZ.

  • takezo_3001takezo_3001 Posts: 1,979
    edited March 2016
    daywalker03 said:
    takezo_3001 said:
    Jakku said:

    Impressive work :)

    Thanks for making this great product Zev0

    It is easy to see that you take great pride in your products, down to the smallest detail.

    Crazy to think that all this time the figures were not even reaching their full potential.

    DAZ is so lazy :p

    I for one am glad DAZ is "lazy," as they would've charged twice as much for these morphs, plus, I love Zev0's work as well...Often times You need an outside perspective for an inside problem anyways as they usually offer the better solution!

    I'm not sure it's laziness; it may well be that it ended up being lower priority than other stuff for DAZ.

    I use the term as tongue-in-cheek, still, I should've been clearer in my statement, I'll edit my original comment to reflect this...To be honest, I cannot say whether it's low priority or not, but I am glad to see this character generation's flexibility is perfectly integrated into the model's advanced technology in order to easily accomplish these morphs! :^)

    Post edited by takezo_3001 on
  • takezo_3001takezo_3001 Posts: 1,979
    edited March 2016

    Mods please delete double post!

    Post edited by takezo_3001 on
  • Zev0Zev0 Posts: 7,089
    edited March 2016

    Added new Hip Adjuster morphs. This can come in handy on certain shapes where that area needs some adjusting. Basically you can offset that crease height where the leg meets the hip. These aren't automated, so you can set how much you want to have it in when combined with a specific pose or when the bend controllers are active in relation to a specific pose.

    hipadjust.jpg
    904 x 1478 - 378K
    Post edited by Zev0 on
  • Zev0Zev0 Posts: 7,089
    edited March 2016

    Oh Glute Control is nearly complete, will start showing that when I finalize some things.

    Post edited by Zev0 on
  • jakkujakku Posts: 91

    Great :)

    Hip adjuster is fantastic!

  • nicsttnicstt Posts: 11,715
    Zev0 said:

    Oh Glute Control is nearly complete, will start showing that when I finalzie some things.

    Looks great; hurry up and take my cash damnit! :)

  • Rod Wise DriggoRod Wise Driggo Posts: 2,211

    Any release date on bend and glute control yet?

  • Zev0Zev0 Posts: 7,089

    None yet.

  • Rod Wise DriggoRod Wise Driggo Posts: 2,211

    Bummer. Hope early April. Having seen the promos I cannot work the way G3F originally bends no more ;-)

  • nightwolf1982nightwolf1982 Posts: 1,160

    I now consider most of Zev0's shaping and control products necessary purchases.  Will be getting this as soon as it's available.

  • cosmo71cosmo71 Posts: 3,609
    edited April 2016

    I would like to have a standard morph that allows to smooth the back of G3F when the upper body is bend forward, you allways get a bulge on the back between the lower and upper Abdomen. The ZoneSmoother tool can fix this but then you have to create the smoothing morph for each pose new.

    It is not possible to bend lower and upper abdomen forward and get a "round" result and this is getting much worse if you create a more "chubby" character

    Post edited by cosmo71 on
  • cosmo71cosmo71 Posts: 3,609

    second thing is the release date? when will this product be released?

  • cosmo71cosmo71 Posts: 3,609
    edited April 2016

    here is an image that shows and explains what I mean with the "smoothing back" morph. Okay, the yellow line is not perfect but I think it shows what I mean. The Zone Smoother tool can fix this but only for this pose, if you move the hip (not the pelvis) for example and have the same values for lower and upper Abdomen as before the "smoothed morph" looks terrible and you have to create it new for the new pose. ZoneSmoother is a great tool but works only for one pose, I need a smoothing slider for this body region that works in general.

    bulge_lower_-_upper.jpg
    1272 x 627 - 102K
    Post edited by cosmo71 on
  • Zev0Zev0 Posts: 7,089

    Here is the Promo Vid.

  • jakkujakku Posts: 91

    Great improvements, knee bend looks good!

    When can we buy it? :)

    What poses are you using in the promo, if I may ask :)

  • Zev0Zev0 Posts: 7,089
    edited April 2016
    According to plan, it is scheduled for this month. Need to finish up Glute Control as well. Regarding the poses I will have to check. They are mixed poses from different sets.
    Post edited by Zev0 on
  • Zev0Zev0 Posts: 7,089

    The pose sets used was from http://www.daz3d.com/the-dancer-for-genesis-3-female-s and hush-for-g3f-amp-v7 over at rendo.

  • jakkujakku Posts: 91

    Thank you :)

  • takezo_3001takezo_3001 Posts: 1,979

    This is the most anticipated product on my list, the second is the glute control! ;^) Thank you for your excellent work!

     

Sign In or Register to comment.