Loading...
> >

CAR AND BIKE LOVERS THREAD - MARK III

1…3738404243…50

Comments

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Bethany's Little Red Corvette!

    bethany_s_little_red_corvette_1.jpg
    1900 x 1068 - 1M
  • usherstangusherstang Posts: 89
    edited December 1969

    nice work betsy hopefully soon i can get this good.

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Practice makes perfect, and even this render has a flaw in it, notice the drivers door is a different color of red!

  • usherstangusherstang Posts: 89
    edited December 1969

    yeah i noticed that.what scene did u use and what did it cost?

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    The scene I used is for the Multiplane Cyclorama, it is available from both sharecg and Rendo, for free, they come in several scenes per pack, and the person has several packs available now, so you would have to search the free listings for DAZ Studio.

  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Betsy, on the vette door, it looks like the ambient setting is set to white (255,255,255). Reset it to what the rest of the body is set at, possibly black (0,0,0). That looks like the problem to me. I am no expert but I have seen that kind of pastel washout before and that was the problem.

    :-)

  • music2u4umusic2u4u Posts: 2,822
    edited October 2014

    Usherstang, I don't know why the sphere texture image is so grainey and bright. It should not look like that, unless you messed with the uberlighting. The lights are set for the scene. The distant light is pointed from where the sun is in the image and needed for the shadow to cast. Sould not have to move any lights. Also, What version of Daz are you using? It should be 4.5 or 4.6. Also, you forgot to turn on the ground shadow plane. It is like a flat plane that is gray. You can turn it on and off with the little eye in your content window where all the stuff is listed. If it is turned off, it will not show in the render. Turn it back on and it will be invisible in the render with only the shadow showing. It works great on anything you place on it. Even people and props. Be sure it is setting right on the floor and not below it or above it or it will show a gap between the item it is shadowing. Be sure the item is set exactly right on top of it and not above it or down into it. Be sure it is turned on, then render.

    :-)

    Post edited by music2u4u on
  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    music2u4u said:
    Betsy, on the vette door, it looks like the ambient setting is set to white (255,255,255). Reset it to what the rest of the body is set at, possibly black (0,0,0). That looks like the problem to me. I am no expert but I have seen that kind of pastel washout before and that was the problem.

    :-)

    I figured out what I did wrong, I simply used a different version of the same shader.

  • Robert FreiseRobert Freise Posts: 4,444
    edited December 1969

    I know that this wasn't your intent but I thought it looked like any number of cars that I've seen that have had a body part replaced

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    I know that's right, but you would be very hard pressed to see any Corvette's like that!

  • usherstangusherstang Posts: 89
    edited December 1969

    music2u4u said:
    Usherstang, I don't know why the sphere texture image is so grainey and bright. It should not look like that, unless you messed with the uberlighting. The lights are set for the scene. The distant light is pointed from where the sun is in the image and needed for the shadow to cast. Sould not have to move any lights. Also, What version of Daz are you using? It should be 4.5 or 4.6. Also, you forgot to turn on the ground shadow plane. It is like a flat plane that is gray. You can turn it on and off with the little eye in your content window where all the stuff is listed. If it is turned off, it will not show in the render. Turn it back on and it will be invisible in the render with only the shadow showing. It works great on anything you place on it. Even people and props. Be sure it is setting right on the floor and not below it or above it or it will show a gap between the item it is shadowing. Be sure the item is set exactly right on top of it and not above it or down into it. Be sure it is turned on, then render.

    :-)

    thanks music yea i did mess with the lighting and i have the latest version of daz. will try this render again with the advice you just gave me and with a different car. thanks for the help.

  • hacsarthacsart Posts: 2,025
    edited December 1969

    Was looking for some backgrounds other than the Yosemite sets and found theses - Summer RenderSpots. Not too bad, uses IBL and only thing to watch is that they are a curved background set, rather like a photo studio paper backdrop roll.. Still quite nice with the supplied lightsets...The Rolls is from that set I bought ages ago, and I added in some M4/V4 stuff that I've had kicking around, once I saw how the figure-less render was shaping up..

    rolls_test.jpg
    1100 x 688 - 127K
  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Meanwhile, back at the Mockingbird Lane Community Center!

    mocking_bird_lane_community_center.jpg
    1900 x 1068 - 1M
  • Robert FreiseRobert Freise Posts: 4,444
    edited December 1969

    Cool pic
    Have the car in my cart just have to purchase

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Its a cool set of wheels, and you get two cars with it, I haven't even played with all the features yet!

  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    hacsart said:
    Was looking for some backgrounds other than the Yosemite sets and found theses - Summer RenderSpots. Not too bad, uses IBL and only thing to watch is that they are a curved background set, rather like a photo studio paper backdrop roll.. Still quite nice with the supplied lightsets...The Rolls is from that set I bought ages ago, and I added in some M4/V4 stuff that I've had kicking around, once I saw how the figure-less render was shaping up..

    Ajar has a backdrop that is like that. It comes with morph dials and you can select from 14 different bends on the backdrop. It also has a dial that will squeeze the center side in, one to make the top taller, and one to make the ground stretch out more. You can add any image you want to it. Very nice Rolls. I like it!

    :-)

  • music2u4umusic2u4u Posts: 2,822
    edited October 2014

    betsy662 said:
    Meanwhile, back at the Mockingbird Lane Community Center!

    Spooky! That structure looks kinda like my "Gates to Hell" model I made last year only a lot fancier.


    :-)

    mocking_bird_lane_community_center.jpg
    600 x 337 - 21K
    GatewayToHell1.jpg
    1280 x 1024 - 181K
    Post edited by music2u4u on
  • hacsarthacsart Posts: 2,025
    edited December 1969

    Ferrari - SKP conversion -scene with Renderspots scene/lights...

    f458_3.jpg
    1100 x 1100 - 185K
  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Nice! Love red cars!

    :-)

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Grocery Getter!

    grocery_getter_too.jpg
    1900 x 1068 - 1M
  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    After she's Had Her Way!

    dumping_the_body_1.jpg
    1900 x 1068 - 1M
  • NEONnycNEONnyc Posts: 14
    edited December 1969

    betsy662 said:
    Grocery Getter!

    Like this one! Brings back memories of my father's '56 Pontiac Star Chief. His was a dark turquoise over white 4-door. Many, many road trips in that old beast, and the car I learned to drive with. :-)
  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Found some new GTA cars on a game modding site. I converted about 10 of them yesterday. Still working on the textures and resizing to fit into Poser and Daz. Got this one finished today. Very nice mesh and great detail. Even the tires are good. This is a 1967 Dodge Coronet with a 440 magnum. Super nice!

    :-)

    1967DodgeCoronet440_5.jpg
    1280 x 1024 - 463K
    1967DodgeCoronet440_4.jpg
    1280 x 1024 - 564K
    1967DodgeCoronet440_3.jpg
    1280 x 1024 - 239K
    1967DodgeCoronet440_2.jpg
    1280 x 1024 - 154K
    1967DodgeCoronet440_1.jpg
    1280 x 1024 - 229K
  • CherokeeCherokee Posts: 292
    edited December 1969

    music2u4u said:
    Found some new GTA cars on a game modding site. I converted about 10 of them yesterday. Still working on the textures and resizing to fit into Poser and Daz. Got this one finished today. Very nice mesh and great detail. Even the tires are good. This is a 1967 Dodge Coronet with a 440 magnum. Super nice!

    :-)

    That one is nice and a good mesh. I've had it for awhile and posted a pic of it back in August. Not sure where you got yours but mine came from http://www.gtainside.com/en/download.php?do=detail&cat=133&start=0&id=63299&orderBy;=.

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    I'll have to look to see if I have the coronet, in the meantime, here's 1313 Mockingbird Lane!

    1313_Mockingbird_Lane.jpg
    1900 x 1068 - 849K
  • Robert FreiseRobert Freise Posts: 4,444
    edited December 1969

    Looks like you beat me to it if that's the one from 3d warehouse

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Yes it is!

  • GLWoodardGLWoodard Posts: 3,335
    edited December 1969

    Lil Red Devil!

    lil_red_devil_too.jpg
    1900 x 1068 - 576K
    lil_red_devil.jpg
    1900 x 1068 - 444K
  • Robert FreiseRobert Freise Posts: 4,444
    edited December 1969

    Love the tit frontend

  • music2u4umusic2u4u Posts: 2,822
    edited December 1969

    Fearless Fury!...lol.

This discussion has been closed.